Bosch Dishwasher Repair

It has stopped mid-cycle and shows E15, with the pump running constantly. Bosch puts a float switch in the base pan. Water reaching it triggers an anti-flood shutdown and the drain pump runs to protect your floor. That is the appliance doing its job — but something above it is leaking, and tipping the machine to drain the pan without finding the leak just resets the clock.

Water is sitting in the bottom of the tub. Drain pump, the filter assembly, or the check valve that stops waste water returning. Bosch filters are user-serviceable and a lot of owners have never removed one — it twists out of the tub floor and rinses under a tap.

It will not start and the display is dark. Door latch, the control board, or power at the outlet. On the quieter models people also assume a running machine is dead because they cannot hear it — the InfoLight projected onto the floor is there for exactly that reason.

Dishes come out gritty or with white film. Spray arms blocked, the filter overdue a clean, or hard-water scale. Toronto water is hard enough that scale is a genuine factor rather than a sales line, and rinse aid is not optional on a condensation-drying machine.

The door drops open instead of holding position. Door springs or the cables that run to them. On a panel-ready Bosch carrying a heavy custom door front, this happens sooner and it will damage the hinge if it is left.

Even glassware is coming out wet on the 800 series. Those models add a zeolite drying stage that converts moisture to heat, and it is a serviceable component. On those machines wet glass is worth diagnosing — on a 300 series it is normal behaviour.

If the rest of the kitchen needs attention, Bosch refrigerator repair and oven and cooktop repair cover it.